Dsdt-Nc Micro Switch on off Long Life by China manufacturers WEIPENG®. Our competitive pricing and popularity in the European and American markets make us an ideal long-term partner for your Household appliances ultra-small micro switch needs in China.
WEIPENG® is a leading Dsdt-Nc Micro Switch on off Long Life manufacturers, suppliers and exporter.
Tongda Dsdt-Nc Micro Switch on off Long Life Introduction
Micro switches can be used for flow control and water level detection in water supply equipment, such as water pumps, water level switches, etc. Micro switches can be used for switch control and position detection in electric vehicles, such as electric vehicle brake switches, charging sockets, etc. Micro switches can be used for button control and position detection in electronic gaming equipment, such as gamepads, joysticks, etc.
Tongda Dsdt-Nc Micro Switch on off Long Life Parameter (Specification)
Switch Technical Characteristics: | |||
ITEM | Technical Parameter | Value | |
1 | Electrical Rating | 5(2)A/10A/16(3)A/21(8)A 250VAC | |
2 | Contact Resistance | ≤30mΩ Initial value | |
3 | Insulation Resistance | ≥100MΩ (500VDC) | |
4 |
Dielectric Voltage |
Between non-connected terminals |
1000V/0.5mA/60S |
Between terminals and the metal frame |
3000V/0.5mA/60S | ||
5 | Electrical Life | ≥50000 cycles | |
6 | Mechanical Life | ≥1000000 cycles | |
7 | Operating Temperature | -25~125℃ | |
8 | Operating Frequency |
electrical :15 cycles Mechanical :60 cycles |
|
9 | Vibration Proof |
Vibration Frequency : 10~55HZ; Amplitude :1.5mm; Three directions :1H |
|
10 |
Solder Ability : More than 80% of immersed part shall be covered with solder |
Soldering Temperature :235±5℃ Immersing Time :2~3S |
|
11 | Solder Heat Resistance |
Dip Soldering :260±5℃ 5±1S Manual Soldering : 300±5℃ 2~3S |
|
12 | Safety Approvals | UL、CSA、VDE、ENEC、TUV、CE、KC、CQC | |
13 | Test Conditions |
Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure :86~106KPa |
Tongda Dsdt-Nc Micro Switch on off Long Life Detail