Micro Switch Short Lever medical Equipments

Micro Switch Short Lever medical Equipments has a small contact interval and a quick action mechanism, and the contact mechanism for switching action with the specified stroke and force is covered by the shell, and there is a transmission on the outside, and the shape is small

Model:HK-04G-1AD-047

Send Inquiry

Product Description

WEIPENG® is a leading Micro Switch manufacturers, suppliers and exporter.

Tongda Micro Switch Short Lever medical Equipments Introduction

Micro Switch including two contacts like NO and NC which are connected with a snap-action switching mechanism. These switches are capable of performing safely, reliably, and accurately in several harsh environments. The snap-action defines a changeover switch whereby contact-making and breaking speed are independent of the operating speed of the actuator.

Tongda Micro Switch Short Lever medical Equipments Application

The Micro Switches we can offer are commonly used in home appliance applications, building, automation and security applications. For example:

Push buttons for alarms and call points
Turning devices on surveillance cameras
Triggers to alert if a device is dismounted
HVAC applications
Access control panels
Elevator buttons and door locks
Timer controls
Washing machine buttons, door locks and water level detection
Air conditioning units
Refrigerators - ice and water dispensers
Rice cookers and microwave ovens - door locks and buttons.

Tongda Micro Switch Short Lever medical Equipments Parameter (Specification)

Switch Technical Characteristics:
ITEM	Technical Parameter		Value
1	Electrical Rating		5(2)A 125V/250VAC 10(3)125V/250VAC
2	Contact Resistance		≤50mΩ Initial value
3	Insulation Resistance		≥100MΩ (500VDC)
4	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
5	Electrical Life		≥10000 cycles
6	Mechanical Life		≥100000 cycles
7	Operating Temperature		-25~125℃
8	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
9	Vibration Proof		Vibration Frequency :10~55HZ; Amplitude :1.5mm; Three directions :1H
10	Solder Ability : More than 80% of immersed part shall be covered with solder		Soldering Temperature : 235±5℃ Immersing Time :2~3S
11	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
12	Safety Approvals		UL、CSA、VDE、ENEC、CE
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure : 86~106KPa