Microwave Oven Door Micro Switch Frigidaire

Microwave Oven Door Micro Switch Frigidairehas a small contact interval and a quick action mechanism, and the contact mechanism for switching action with the specified stroke and force is covered by the shell, and there is a transmission on the outside, and the shape is small

Model:HK-04G-1AD-021

Send Inquiry

Product Description

WEIPENG® is a leading Microwave Oven Door Micro Switch Frigidaire manufacturers, suppliers and exporter.

Tongda Microwave Oven Door Micro Switch Frigidaire Introduction

Micro switches can be used for switch control and position detection in environmental protection equipment, such as garbage processors, range hoods, etc.

Tongda Microwave Oven Door Micro Switch Frigidaire Application

Micro switches can be used for flow control and water level detection in water supply equipment, such as water pumps, water level switches, etc. Micro switches can be used for switch control and position detection in electric vehicles, such as electric vehicle brake switches, charging sockets, etc. Micro switches can be used for button control and position detection in electronic gaming equipment, such as gamepads, joysticks, etc.

Tongda Microwave Oven Door Micro Switch Frigidaire Parameter (Specification)

Switch Technical Characteristics:
ITEM	Technical Parameter		Value
1	Electrical Rating		5(2)A 125V/250VAC 10(3)125V/250VAC
2	Contact Resistance		≤50mΩ Initial value
3	Insulation Resistance		≥100MΩ (500VDC)
4	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
5	Electrical Life		≥10000 cycles
6	Mechanical Life		≥100000 cycles
7	Operating Temperature		-25~125℃
8	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
9	Vibration Proof		Vibration Frequency :10~55HZ; Amplitude :1.5mm; Three directions :1H
10	Solder Ability : More than 80% of immersed part shall be covered with solder		Soldering Temperature : 235±5℃ Immersing Time :2~3S
11	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
12	Safety Approvals		UL、CSA、VDE、ENEC、CE
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure : 86~106KPa