Micro Switch with Special Bend Lever

Micro Switch with Special Bend Lever has a small contact interval and a quick action mechanism, and the contact mechanism for switching action with the specified stroke and force is covered by the shell, and there is a transmission on the outside, and the shape is small

Model:HK-04G-L

Send Inquiry

Product Description

WEIPENG® is a leading Micro Switch with Special Lever manufacturers, suppliers and exporter.

Tongda Wire Electric Micro Switch with Special Bend Lever Introduction

Micro switches can be used for flow control and water level detection in water supply equipment, such as water pumps, water level switches, etc. Micro switches can be used for switch control and position detection in electric vehicles, such as electric vehicle brake switches, charging sockets, etc. Micro switches can be used for button control and position detection in electronic game equipment, such as joysticks, steering wheels, etc.

Tongda Wire Electric Micro Switch with Special Bend Lever Application

Micro switches can be used for switch control and light adjustment in lighting equipment, such as lamps, downlights, etc. Micro switches can be used for position detection and alarm triggering in security equipment, such as access control switches, camera switches, etc. Micro switches can be used for switch control and position detection in aerospace equipment, such as door switches, heading indicators, etc. Micro switches can be used for switch control and position detection in energy equipment, such as generators, leakage protectors, etc.

Tongda Wire Electric Micro Switch with Special Bend Lever Parameter (Specification)

Switch Technical Characteristics:
ITEM	Technical Parameter		Value
1	Electrical Rating		5(2)A 125V/250VAC 10(3) 125V/250VAC
2	Contact Resistance		≤50mΩ Initial value
3	Insulation Resistance		≥100MΩ (500VDC)
4	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
5	Electrical Life		≥10000 cycles
6	Mechanical Life		≥100000 cycles
7	Operating Temperature		-25~125℃
8	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
9	Vibration Proof		Vibration Frequency :10~55HZ; Amplitude :1.5mm; Three directions :1H
10	Solder Ability : More than 80% of immersed part shall be covered with solder		Soldering Temperature : 235±5℃ Immersing Time :2~3S
11	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
12	Safety Approvals		UL、CSA、VDE、ENEC、CE
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure : 86~106KPa