Product Description

WEIPENG® is a leading Micro Switch Micro Switch for Home Appliance manufacturers, suppliers and exporter.

Tongda Micro Switch Micro Switch for Home Appliance Introduction

Micro switches can be used for flow control and water level detection in water supply equipment, such as water pumps, water level switches, etc. Micro switches can be used for switch control and position detection in electric vehicles, such as electric vehicle brake switches, charging sockets, etc. Micro switches can be used for button control and position detection in electronic game equipment, such as joysticks, steering wheels, etc.

Tongda Micro Switch Micro Switch for Home Appliance Application

Micro switches can be used for flow control and water level detection in water supply equipment, such as water pumps, water level switches, etc. Micro switches can be used for switch control and position detection in electric vehicles, such as electric vehicle brake switches, charging sockets, etc. Micro switches can be used for button control and position detection in electronic gaming equipment, such as gamepads, joysticks, etc.

Tongda Micro Switch Micro Switch for Home Appliance Parameter (Specification)

Switch Technical Characteristics:
ITEM	Technical Parameter		Value
1	Electrical Rating		5(2)A 125V/250VAC 10(3)125V/250VAC
2	Contact Resistance		≤50mΩ Initial value
3	Insulation Resistance		≥100MΩ (500VDC)
4	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
5	Electrical Life		≥10000 cycles
6	Mechanical Life		≥100000 cycles
7	Operating Temperature		-25~125℃
8	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
9	Vibration Proof		Vibration Frequency :10~55HZ; Amplitude :1.5mm; Three directions :1H
10	Solder Ability : More than 80% of immersed part shall be covered with solder		Soldering Temperature : 235±5℃ Immersing Time :2~3S
11	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
12	Safety Approvals		UL、CSA、VDE、ENEC、CE
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure : 86~106KPa