Mini Micro Limit Switch with Roller

Mini Micro Limit Switch with Roller has a small contact interval and a quick action mechanism, and the contact mechanism for switching action with the specified stroke and force is covered by the shell, and there is a transmission on the outside, and the shape is small

Model:DK4-BT-014

Send Inquiry

Product Description

WEIPENG® is a leading Mini Micro Limit Switch with Roller manufacturers, suppliers and exporter.

Tongda Wire Electric Mini Micro Limit Switch with Roller Introduction

Micro switches can adapt to different application scenarios through different trigger forces.The contact time of the micro switch is usually under 1 millisecond.Micro switches can be connected with other circuit devices through junction boxes or connectors.

Tongda Wire Electric Mini Micro Limit Switch with Roller Application

A micro switch is a commonly used electrical switch, which is usually opened and closed by a trigger device with resilience. Micro switches are usually used to control the switching operation in the circuit, which can realize the transmission and control of signals. The micro switch has a simple structure, small size, and is easy to install and use. The micro switch has sensitive trigger force and accurate action position, and is suitable for occasions requiring precise control.

Tongda Wire Electric Mini Micro Limit Switch with Roller Parameter (Specification)

Switch Technical Characteristics:
ITEM	Technical Parameter		Value
1	Electrical Rating		10(1.5)A 125/250VAC 10A 36VDC
2	Contact Resistance		≤50mΩ Initial value
3	Insulation Resistance		≥100MΩ (500VDC)
4	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
5	Electrical Life		≥10000 cycles
6	Mechanical Life		≥3000000 cycles
7	Operating Temperature		-25~105℃
8	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
9	Vibration Proof		Vibration Frequency : 10~55HZ; Amplitude :1.5mm; Three directions :1H
10	Solder Ability : More than 80% of immersed part shall be covered with solder		Soldering Temperature :235±5℃ Immersing Time :2~3S
11	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
12	Safety Approvals		UL、CSA、TUV、ENEC
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure :86~106KPa