Explanation of the usage of various switches

Push Button Switch

Confirm switch state: Push button switches usually have two states: pressed (ON) and released (OFF). Before use, determine the current state of the switch as needed.
Press the button: Use your finger or a suitable implement to press the button lightly and keep it pressed. This will open the corresponding circuit connection.
To release the button: Once the desired action is complete, lift your finger or tool off the button, allowing it to release. This will close the circuit connection.
Confirm switch status: After using the push button switch, confirm whether the switch successfully connects or disconnects the circuit. Verify by observing the operation of the circuit or using a suitable measurement tool.

Confirm switch state: A toggle switch usually has two states: ON and OFF. Before use, determine the current state of the switch as needed.
Toggle switch position: After determining the state of the switch, use your finger or a suitable tool to move the switch to the desired position. Some toggle switches may have multiple positions, which can be toggled to the appropriate position as needed.
Determine how the connection is made: A toggle switch is usually used to turn a circuit connection on or off. Before using, please understand how the switch is connected to ensure that it is properly connected to the circuit.
Ensure Safety: When using a toggle switch, make sure to use the proper voltage and current. Avoid dangerous situations such as overloads and short circuits.
Confirm switch status: After using the toggle switch, confirm whether the switch successfully connects or disconnects the circuit. Verify by observing the operation of the circuit or using a suitable measurement tool.

Determining the state of the switch: Before using a push button switch, first determine whether the current state of the switch is on or off. Some pushbutton switches may have lights to show their status.
To turn on the switch: Press the button so that it is in the pressed state. Usually, the button will make a "click" sound when pressed, indicating that the circuit is connected. At this point, the switch will be on and passing current.
To close the switch: Press the button again to return it to the up position. At this point, the switch will be closed and open the circuit, interrupting the flow of current.
Confirm the switch state: After using the push button switch, you can confirm whether the switch has successfully connected or disconnected the circuit by observing the working state of the switch or the corresponding equipment.

Rotray Switch

Determine the starting position of the button: Rotary buttons usually have a starting position, which is the initial state of the button. Before starting the operation, please confirm the current position and corresponding state of the button.
Clockwise rotation: If you need to rotate the button clockwise from the starting position, use your finger or a special rotating tool to turn the button clockwise. Depending on the design of the button, the direction of rotation may be clockwise or counterclockwise.
Rotate counterclockwise: If you need to rotate the button counterclockwise from its original position, use your finger or a special rotating tool to turn the button counterclockwise. Make sure to rotate the button to the desired position.
Pay attention to state changes: By rotating the button, some functions or states of the device may be changed. When turning the button, please pay attention to observe the changes of the related equipment to ensure the correct and effective operation of the button