Switch Waterproof for Washing Manchine has a small contact interval and a quick action mechanism, and the contact mechanism for switching action with the specified stroke and force is covered by the shell, and there is a transmission on the outside, and the shape is small
Tongda Switch Waterproof for Washing Manchine Introduction
The waterproof micro switch has good insulation performance, which can effectively prevent safety accidents such as leakage and electric shock. It usually has a long service life and is less prone to failure and damage. Waterproof micro switches are suitable for various control systems and sensing devices in robotics, such as robot arms, touch sensors, etc. Its waterproof performance can ensure that the robot can work normally in wet environment.
Tongda Switch Waterproof for Washing Manchine Parameter (Specification)
Switch Technical Characteristics: | |||
ITEM | Technical Parameter | Value | |
1 | Electrical Rating | 5 (2)A 125/250VAC 10(3) 125V/250VAC | |
2 | Operating Force | 1.0~5.0N | |
3 | Pretravel | 0.6~1.5mm | |
4 | Contact Resistance | ≤50mΩ Initial value | |
5 | Insulation Resistance | ≥100MΩ (500VDC) | |
6 |
Dielectric Voltage |
Between non-connected terminals |
500V/0.5mA/60S |
Between terminals and the metal frame |
1500V/0.5mA/60S | ||
7 | Electrical Life | ≥10000 cycles | |
8 | Mechanical Life | ≥100000 cycles | |
9 | Operating Temperature | -25~85℃ | |
10 | Operating Frequency |
Electrical :15 cycles Mechanical :60 cycles |
|
11 | Vibration Proof |
Vibration Frequency :10~55HZ; Amplitude :1.5mm; Three directions :1H |
|
12 |
Solder Ability : More than 80% of immersed part shall be covered with solder |
Soldering Temperature :235±5℃ Immersing Time : 2~3S |
|
13 | Solder Heat Resistance |
Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S |
|
14 | Safety Approvals | UL、CSA、CQC | |
15 | Test Conditions |
Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure :86~106KPa |
Tongda Switch Waterproof for Washing Manchine Details