Sensitive Micro Switch Auto Parts Transfer

Sensitive Micro Switch Auto Parts Transfer is offered by China manufacturers WEIPENG®. Our competitive pricing and popularity in the European and American markets make us an ideal long-term partner for your Household appliances ultra-small micro switch needs in China.

Model:HK-04G-3AZ-028

Send Inquiry

Product Description

WEIPENG® is a leading Sensitive Micro Switch Auto Parts Transfermanufacturers, suppliers and exporter.

Tongda Sensitive Micro Switch Auto Parts Transfer Transfer Introduction

A micro switch, or a miniature snap-action switch, is an electronic device used to make or break the flow of electric currents. A micro switch typically contains an actuating plunger that travels a short distance to trigger the contact sequence. In order for this to happen, the actuating plunger must be pushed a predetermined amount before it activates. After the actuator is released, the switch will return to its original state.

Tongda Sensitive Micro Switch Auto Parts Transfer Parameter (Specification)

Switch Technical Characteristics:
ITEM	Technical Parameter		Value
1	Electrical Rating		5(2)A 125V/250VAC 10(3)125V/250VAC
2	Contact Resistance		≤50mΩ Initial value
3	Insulation Resistance		≥100MΩ (500VDC)
4	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
5	Electrical Life		≥10000 cycles
6	Mechanical Life		≥100000 cycles
7	Operating Temperature		-25~125℃
8	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
9	Vibration Proof		Vibration Frequency :10~55HZ; Amplitude :1.5mm; Three directions :1H
10	Solder Ability : More than 80% of immersed part shall be covered with solder		Soldering Temperature : 235±5℃ Immersing Time :2~3S
11	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
12	Safety Approvals		UL、CSA、VDE、ENEC、CE
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure : 86~106KPa