Micro Switch Push Button Office Part

Micro Switch Push Button Office Part has a small contact interval and a quick action mechanism, and the contact mechanism for switching action with the specified stroke and force is covered by the shell, and there is a transmission on the outside, and the shape is small

Model:HK-04G-4AZ-117

Send Inquiry

Product Description

WEIPENG® is a leading China Tongda Micro Switch Push Button Office Part manufacturers, suppliers and exporter.

Tongda Wire Electric Tongda Micro Switch Push Button Office Part Introduction

These switches are simple and small devices including two contacts like NO and NC which are connected with a snap-action switching mechanism. These switches are capable of performing safely, reliably, and accurately in several harsh environments. The snap-action defines a changeover switch whereby contact-making and breaking speed are independent of the operating speed of the actuator.

Tongda Wire Electric Tongda Micro Switch Push Button Office Part Application

Whether it be the industrial, construction, agriculture, commercial, or transportation industry, the micro switch has become an integral part of the sensing and control community. There are perhaps trillions of micro switches in use at this very moment in various types of industrial equipment, agriculture or construction machinery, and control systems around the globe. The fact that such a simple device – with normally open or closed contacts coupled with a snap-action switching mechanism – is capable of performing at an enhanced precision level, reliably and safely, in the many harsh environments, is simply astonishing.

Tongda Wire Electric Tongda Micro Switch Push Button Office Part Parameter (Specification)

Switch Technical Characteristics:
ITEM	Technical Parameter		Value
1	Electrical Rating		5(2)A 125V/250VAC 10(3)125V/250VAC
2	Contact Resistance		≤50mΩ Initial value
3	Insulation Resistance		≥100MΩ (500VDC)
4	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
5	Electrical Life		≥10000 cycles
6	Mechanical Life		≥100000 cycles
7	Operating Temperature		-25~125℃
8	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
9	Vibration Proof		Vibration Frequency :10~55HZ; Amplitude :1.5mm; Three directions :1H
10	Solder Ability : More than 80% of immersed part shall be covered with solder		Soldering Temperature : 235±5℃ Immersing Time :2~3S
11	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
12	Safety Approvals		UL、CSA、VDE、ENEC、CE
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure : 86~106KPa