> Products > Waterproof Micro Switch > Waterproof Micro Switch Special Bracket Atuo Parts

Products

New Products

Waterproof Micro Switch Special Bracket Atuo Parts

As the professional manufacturers, WEIPENG® would like to provide you Waterproof Micro Switch Special Bracket Atuo Parts. And we will offer you the best after-sale service and timely delivery. For more information on the 0.1a 48VDC 125v 250VAC Waterproof Micro Switch, please feel free to contact us.

Model:FSK-20-001

Send Inquiry

Product Description

WEIPENG® is a leading China TWaterproof Micro Switch Special Bracket Atuo Parts manufacturers, suppliers and exporter.

Tongda Wire Electric Waterproof Micro Switch Special Bracket Atuo Parts Introduction

Waterproof micro switch of the new waterproof and dustproof structure, including the base, the first upper cover and the shrapnel mounted on the base, the first upper cover and the base buckle connection, further includes the second upper cover and silicone pressing parts, the first upper cover is provided with a first through hole, the first upper cover is provided with a first through hole, the upper end of the first through hole is convex from the upper end face of the first upper cover to form a waterproof convex rib, the upper end face of the first upper cover is provided with a mounting column, and the installation column is set around the waterproof convex rib; The second upper cover is located above the silicone press piece, the silicone press piece and the second upper cover are inserted into the installation column in turn and riveted with the installation column, the bottom of the silicone press piece is linked with the shrapnel to press the conduction, and the upper part is protruding from the surface of the second upper cover for pressing, and the silicone pressing part is closely matched with the waterproof convex rib.

Tongda Wire Electric Waterproof Micro Switch Special Bracket Atuo Parts Feature and Application

Waterproof microswitch is widely used in all kinds of cold, wet, dust and all kinds of harsh environment. Such as automobiles, spraying equipment, etc

Switch Technical Characteristics:
ITEM	Technical parameter		Value
1	Electrical Rating		0.1A/1A/3A 250VAC
2	Operating Force		1.0~2.5N
3	Contact Resistance		≤300mΩ
4	Insulation Resistance		≥100MΩ (500VDC)
5	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
6	Electrical Life		≥50000 cycles
7	Mechanical Life		≥100000 cycles
8	Operating Temperature		-25~105℃
9	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
10	Vibration Proof		Vibration Frequency :10~55HZ; Amplitude : 1.5mm; Three directions :1H
11	Solder Ability :More than 80% of immersed part shall be covered with solder		Soldering Temperature : 235±5℃ Immersing Time :2~3S
12	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure :86~106KPa