> Products > Waterproof Micro Switch > Waterproof Micro Switch Traffice Tools Office

Products

New Products

Waterproof Micro Switch Traffice Tools Office

Waterproof Micro Switch Traffice Tools Office has a small contact interval and a quick action mechanism, and the contact mechanism for switching action with the specified stroke and force is covered by the shell, and there is a transmission on the outside, and the shape is small

Model:FSK-20-148

Send Inquiry

Product Description

WEIPENG® is a leading China Waterproof Micro Switch Traffice Tools Officemanufacturers, suppliers and exporter.

Tongda Wire Electric Waterproof Micro Switch Traffice Tools Office Introduction

Microswitch principle: the external mechanical force acts on the action film through the transmission element (press pin, button, lever, roller, etc.), and the instantaneous is generated when the action piece moves to the critical point Action, so that the moving contact at the end of the action reed is quickly switched on or off with the fixed contact. When the force on the transmission element is removed, the action reed generates a reverse action force, when the transmission element is reversed
After reaching the critical point of the reed's action, the reverse action is completed instantaneously.

Tongda Wire ElectricWaterproof Micro Switch Traffice Tools Office Application

Micro switch in the equipment that needs to frequently change the circuit for automatic control and safety protection, etc., widely used in electronic equipment, instrumentation, mining, power system, household appliances, electrical equipment, as well as aerospace, aviation, ships, missiles, tanks and other military fields, has been widely used in the above fields, although the switch is small, but plays an irreplaceable role. At present, the micro switch on the domestic market varies from 3W times to 1000W times according to the different requirements of use.

Tongda Wire Electric Waterproof Micro Switch Traffice Tools Office Parameter (Specification)

Switch Technical Characteristics:
ITEM	Technical parameter		Value
1	Electrical Rating		0.1A/1A/3A 250VAC
2	Operating Force		1.0~2.5N
3	Contact Resistance		≤300mΩ
4	Insulation Resistance		≥100MΩ (500VDC)
5	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
6	Electrical Life		≥50000 cycles
7	Mechanical Life		≥100000 cycles
8	Operating Temperature		-25~105℃
9	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
10	Vibration Proof		Vibration Frequency :10~55HZ; Amplitude : 1.5mm; Three directions :1H
11	Solder Ability :More than 80% of immersed part shall be covered with solder		Soldering Temperature : 235±5℃ Immersing Time :2~3S
12	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure :86~106KPa